CALL AN EXPERT! +86-131-3073-8426
Cleanroom Air Shower Room
$2,500.00
A cleanroom air shower room is a controlled entry chamber that uses recirculated, HEPA-filtered air to remove loose dust, fibers and particles from personnel before they enter a clean area. It suits pharmaceutical, electronics, laboratory and medical-device projects where traffic flow and contamination control must be planned together. Chamber size, door direction, body material, nozzle layout, filtration level, shower time and access-control logic can be configured around the site. Share your cleanroom level, daily traffic, opening size and destination to receive a project-specific model recommendation and quotation.
Looking to avoid the wait of build time? Contact our engineering team!
Cleanroom Air Shower Room Overview
A cleanroom air shower room is a self-contained entrance chamber used between a non-clean area and a controlled clean area. Before personnel enter the cleanroom, high-velocity air is directed from adjustable nozzles toward garments and exposed surfaces to loosen dust, fibers, hair and other particles. The particle-laden air returns through lower-level grilles, passes through a pre-filter and HEPA filter, and is recirculated for the remainder of the programmed cycle. This process supports contamination control but should be used together with correct gowning, cleaning and personnel procedures.
Key Configuration Reference
| Item | Available Project Direction |
|---|---|
| Use | Personnel entry to cleanrooms and controlled production areas |
| Layout | Straight-through as standard; door direction and chamber depth can be adjusted |
| Body material | Powder-coated steel or stainless steel according to cleaning environment |
| Filtration | Pre-filter plus HEPA filtration; final grade confirmed by project |
| Shower cycle | Common personnel cycles are approximately 10?C30 seconds; controls may support a wider adjustable range |
| Air velocity | Personnel units commonly use a reference range around 20?C25 m/s, subject to final design and testing |
| Controls | Door interlock, fan, lighting, cycle timer and operating prompts |
Main Benefits for a Cleanroom Entrance
- Reduces carried-in particles: filtered jets help remove loose contaminants from clean garments and personnel surfaces before entry.
- Supports zone separation: interlocked doors prevent both sides from opening at the same time during normal operation.
- Creates a repeatable entry step: an automatic sequence helps personnel follow the same basic entry process each time.
- Fits project layouts: chamber dimensions, door orientation and service positions can be adjusted around the opening and traffic path.
Typical Applications
Cleanroom air shower rooms are commonly considered for pharmaceutical production, electronics assembly, semiconductor-related facilities, laboratories, medical-device manufacturing, biotechnology and hygienic food-processing areas. The correct configuration depends on cleanroom classification, the number of people entering per shift, peak traffic, gowning procedure and the contamination risk of the process.
Customization Options
Available project options may include chamber size, one-person or multi-person capacity, stainless-steel construction, adjustable nozzle arrangement, door swing direction, automatic doors, access-control interface, emergency stop, bilingual operating prompts and project-specific electrical supply. For higher-cleanliness projects, buyers may also request filter test requirements, instrument calibration records or a defined site acceptance procedure. These documents and tests should be agreed before production.
Installation Information Required
Before manufacturing, confirm the finished floor level, clear opening, ceiling height, wall-panel thickness, power supply, cable entry, maintenance clearance and clean-side direction. A marked floor plan is especially important when the air shower connects to a changing room, corridor or pressure-controlled cleanroom. The air shower pressure relationship must be coordinated with the complete HVAC and cleanroom design rather than considered as an isolated value.
Maintenance Notes
Routine checks should cover the pre-filter, HEPA filter, nozzle condition, door seals, interlock function, fan, lighting, control panel and internal surfaces. Filter replacement should be based on airflow reduction, pressure condition, damage, leakage test results and the facility maintenance procedure. Cleaning agents must also be compatible with the selected body material.
Request a Project Quote
For an accurate recommendation, send the application industry, cleanroom level, personnel per shift, peak entries per hour, available opening, ceiling height, preferred material, door direction, power supply and destination. The final specification, drawing, filtration configuration and quotation will be prepared according to the confirmed model and project use.
| Model / Configuration | Straight-through personnel air shower; size and door direction customizable |
|---|---|
| Applications | pharmaceutical cleanrooms, electronics plants, laboratories, medical device production |
